Oki CX3641MFP Installation Manual page 15

4. Secure the scanner to the shelf using four
medium screws
Stand Box" on page 9
a. First screw: Pull the safety lever (a) back to
expose the hole in the shelf. Insert one
medium screw up through the hole and into the
scanner, then tighten the screw (1).
b. Remaining three screws: Attach as follows: left
front (2), left rear (3), and right rear (4).
Important!
When moving the scanner stand with the
scanner attached, be sure the scanner is
attached to the underside of the stand with all
four screws. Do not tilt the stand where the
scanner top could shift the weight of the
scanner.
: See "Accessories in the
5. Open the scanner lid and remove all packing
materials.
6. Close the scanner lid and remove all the shipping
tape.
7. Slide the scanner lock (on the left side of the
scanner) to the UNLOCK position.
15