Oki CX3641MFP Installation Manual page 17

4. Attach ferrite cores
DCD cable (1,2).
5. Secure the DCD cable
shelf using one of the cable clips and one of the
medium screws
Box" on page 9).
6. Route the cables neatly as show below.
at the scanner end of the
(to the top back of the
("Accessories in the Stand
When using the handle grip to move the scanner
stand, be careful not to pinch the scanner power
supply cable.
7. Use the tie wraps to attach the scanner power
supply cable to the DCD cable in two places.The
first tie wrap should be 8 inches from the top of
the scanner stand and the second tie wrap
approximately 16 inches below it.
17
Important!