Oki CX3641MFP Installation Manual page 19

3. Move the printer back toward the stand.
4. Connect the printer power cord to the power strip.
5. Use the 2 thumbscrews
to the bumper brackets on either side of the stand
"Accessories in the Stand Box" on page 9.
to attach the printer
6. Attach cables:
a. Uncoil the DCD cable
ferrite cores
below). Cable and ferrite cores are supplied
in the scanner box ("Accessories in Scanner
Box" on page 14).
b. Attach the DCD cable lines to the back of the
scanner.
Note:One of the interface connections shown
below, Network (7) or USB (5), may not be used.
The Fax connection (6) is an option.
19
and mount the
on each line (see 3 and 4