Oki CX3641MFP Installation Manual page 16

8. Insert the locking cap in the scanner lock.
9. Lift the ADF paper tray, then extend the legs and
lower the tray into position.
If you are installing the optional finisher with the
system, see the instructions provided with the
finisher.
Step 5: Make Scanner
Connections
1. Attach the power strip
Printer Box" on page 5) to the lower left side
(viewed from the front) of the scanner stand
using the two screws provided in the printer box.
NOTE
(see "Accessories in
2. Attach the scanner power supply
"Accessories in Scanner Box" on page 14)
to the keyhole inside the back of the stand.
3. Connect the scanner power cable
"Accessories in Printer Box" on page 5) to the
scanner power supply. then connect the other end
to the power strip.
16
(see
(see