Oki CX3641MFP Installation Manual page 21

3. Connect the ferrite core end of the Ethernet cable
to the printer, then connect the opposite end to
the network.
Step 9: Install the Software
Selecting a Printer Driver
Fiery PostScript printer driver
Use this driver for high-resolution color graphics
applications and pre-press graphic proofing. This
driver also includes advanced features which
may only be used by a network administrator.
PCL printer driver
PCL and PCL6 printer drivers are included mainly
for compatibility with legacy systems.
You can install both drivers and use either one
depending on your application. However, each
driver must be installed individually.
®
Windows - Network Setup
Print the Network Information page
1 Press Menu on the control panel.
2 Press the down arrow to select Print
Information. Press Enter.
3 Press the down arrow to select Network. Press
Enter.
4 Execute appears. Press Enter.
Keep these sheets handy: they contain
information you need to set up the printer on
your network.
Install the Driver
1 Insert the CD1 in the CD-ROM drive. the CD
will autorun.
2 Select your language.
3 Accept the license agreement.
4 Click Install Driver.
5 Select network printer.
6 Select Directly to the network using TCP/IP.
7 Enter the IP Address.The IP address can be
found on the Configuration Sheet.
8 Follow the in-screen instructions.
Test the Printer Driver Installation
To make sure the printer driver is correctly
installed, print a page from any program.
Reinstall the driver if the installation failed.
Using a Web Browser (optional)
Use your web browser to configure print server
and printer menu settings on an embedded web
page.
21