8. First person: pivot the release handle (1) on the
side of the stand down and hold it there. Second
person: hold the safety lever (2) back and
maneuver the square hole in the plate lock
mechanism (3) toward the handle key (4) inside
the shelf.
9. Rotate the release handle back and forth while
moving the hole in the plate lock until the handle
key (1) is firmly seated in the hole.
scan_stand_3.jpg
10. Secure the plate lock mechanism with the two
medium screws
11. Secure the plate lock cabling to the hole in the
shelf using one of the tie wraps
the stand.
12. Cut the excess cable from the cable tie.
13
.
provided with