Lcd Settings; Expert Setup - DREAM MULTIMEDIA Dreambox DM7020S Manual

34.

LCD Settings

Press the MENU-Button to enter the OSD-Mainmenu.
Go to (6) Setup -> (3) Sytem Settings -> (6) LCD Settings.
35.

Expert Setup

Press the MENU-Button to enter the OSD-Mainmenu.
Go to (6) Setup -> (6) Expert Setup.
The LC-Display Setup is used to adjust the Brightness
of the LCD at your Dreambox. Use the Navigation-
Buttons left or right to adjust the Brightness, Contrast
and Standby.
Standby is used to adjust the Brightness in Standby-
Mode.
All adjustments take effect immediately.
Checking the Checkbox "Inverted
Press the green Option-Button to save.
Skip confirmations:
Press the OK-Button to set a toggle. No more confirmation
windows will be shown. Be careful with this option. The
'
System doesn t ask anymore, if you would like to see the
recorded movie after stopping recording. Nor if you would
like to really delete a movie. Default is disabled.
Hide error windows:
Press the OK-Button to set a toggle. All error windows will
not be shown. E.g. Service not found. Default is disabled.
Auto show Infobar:
Press the OK-Button to set a toggle. Every time a new
program starts, the Infobar will be shown automatically.
Default is disabled.
Show remain Time:
Press the OK-Button to set a toggle. The remain
Time of the running program will be shown instead
of the complete Time. Default is disabled.
Serviceselector help buttons:
Press the OK-Button to unset the toggle.
The Service selector help buttons won
Default is enabled.
- 36 -
"
, inverts the LCD.
'
t be shown.