A/V Settings - DREAM MULTIMEDIA DREAMBOX DM 500S User Manual

29.

A/V Settings

Press the MENU-Button to enter the OSD-Mainmenu.
Go to Setup -> Sytem Settings -> A/V Settings.
test:
Using the blue Option-Button shows a coupler
of testpictures. Press 1 – 8 to view the diffrent
testpictures. Press any other button to exit the
testmode.
The Dreambox has no built-in Dolby Digital
Decoder, AC3 signals are not available on the
analogue socket, therefore you need an
external Dolby Digital Amplifier to adjust the
Volume.
Press the green Option-Button to save.
Use ether the Navigation-Buttons left and right or
the OK-Button to change or set the Values.
Color Format:
CVBS(FBAS), RGB (Red, Green, Blue seperated),
SVideo (Color- and Brightnes signal seperated) and
YPbPr (Component signal e.g. for Projectors).
Aspect Ratio:
4:3 letterbox (standard), (16:9 programs will be
displayed on 4:3 TV's with black beams at top and
bottom)
4:3 panscan (16:9 programs will be zoomed to full
high on 4:3 TV's, parts of the picture on the left and
right side will cut off)
16:9 (programs transmitted in 16:9 will be displayed
automatically in 16:9, on 4:3 TV's the picture will be
reduced in height)
always 16:9 (for 16:9 TV's, on 4:3 TV's the picture
will be reduced in height)
TV System:
PAL, PAL+PAL60, Multinorm and NTSC
Select the Norm your TV supports.
We suggest to choose Multinorm.
disable WSS on 4:3:
Set a check into the Checkbox to disable zooming
on some 16:9 TV's during 4:3 transmissions.
AC3 default output:
If a program is transmitted with an AC3 Audio-Track
(e.g. Dolby Digital),
automatically to this Audio-Track. The AC3 Signal
will only be available at the optical socket.
- 28 -
the Dreambox switches