Setup; Language; Timezone; A/V Settings - DREAM MULTIMEDIA Dreambox DM 100 User Manual

U s e r M a n u a l D r e a m b o x D M 1 0 0
7.

Setup

7.1

Language

If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option "Language Settings" and press the OK-Button to select.
7.2 Setting the time zone
The time can be set automatically by switching the mode to Auto.
7.3

A/V settings

If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option "A/V Settings" and press the OK-Button to select.
Note: How to change the color format from CVBS or RGB to YPbPr if your screen is black
The factory setting for the video output of your DM100 is RBG. If you connect it to a digital TV using a
YUV cable you will only see a black screen. Follow these two steps to change this:
1. If you install your DM100 for the first time, press the red Options-Button and the 0 and 1 on the
Numeric-Keypad to switch to YPbPr output
2. If you already have your Dreambox installed and switched TV sets you can still proceed in the
same manner: Press the red Options-Button and the 0 and 1 on the Numeric-Keypad to switch
to YPbPr output
OSD Language: select your desired OSD language.
Audio Language: select you desired standard audio
language.
Subtitle Language: select your desired standard
subtitle language.
Select your time and time zone with the Navigation
Buttons up and down. Press the OK-Button to
activate.
Pressing the green Options-Button will enter next
menu.
Pressing the EXIT-Button will enter previous menu.
Color format : 'CVBS'(FBAS), 'RGB' (Red, Green,
Blue separated), YPbPr(YUV)
Aspect Ratio : '4:3' (16:9 programs will be
displayed on 4:3 TV's with black beams at top and
bottom), '16:9' (programs transmitted in 16:9 will be
displayed automatically in 16:9, on 4:3 TV's the
picture will be reduced in height).
TV System : Choose the standard that your TV
supports. 'PAL' or 'NTSC'.
27
english