A/V Settings ................................................................................................................................ - DREAM MULTIMEDIA Dreambox DM7020S Manual

31. A/V Settings
Press the MENU-Button to enter the OSD-Mainmenu.
Go to (6) Setup -> (3) System Settings -> (2) A/V Settings.
Use ether the Navigation-Buttons left and right or the OK-
Button to change or set the Values.
Color Format:
CVBS(FBAS), RGB (Red, Green, Blue seperated),
SVideo (Color- and Brightness signal seperated) and
YPbPr (Component signal e.g. for Projectors).
Aspect Ratio:
4:3 letterbox (standard), (16:9 programs will be
displayed on 4:3 TV's with black beams at top and
bottom )
4:3 panscan (16:9 programs will be zoomed to full high
on 4:3 TV's, parts of the picture on the left and right side
will cut off)
16:9 (programs transmitted in 16:9 will be displayed
automatically in 16:9, on 4:3 TV's the picture will be
reduced in height)
always 16:9 (for 16:9 TV's, on 4:3 TV's the picture will
be reduced in height)
TV System:
PAL, PAL+PAL60, Multinorm and NTSC Select
the Norm your TV supports.
We suggest to choose Multinorm.
Auto VCR switching:
Activating this function (standard) switches the Videosignal
from the VCR socket to the TV. Depending on the used
VCR, switching takes affect by turning on the VCR or
starting playback.
disable WSS on 4:3:
Set a check into the Checkbox to disable zooming on
some 16:9 TV's during 4:3 transmissions.
AC3 default output:
If a program is transmitted with an AC3 Audio-Track (e.g.
Dolby Digital), the Dreambox switches automatically to this
Audio-Track. The AC3 Signal will only be available at the
optical socket.
The Dreambox has no built-in Dolby Digital Decoder, AC3
signals are not available on the analogue socket, therefore
you need an external Dolby Digital Amplifier to adjust the
Volume.
Press the green Option-Button to save.
- 30 -