Intel Desktop Board D865PERL Product Guide
Back Panel Connectors
NOTE
The line out connector, located on the back panel, is designed to power either headphones or
amplified speakers only. Poor audio quality may occur if passive (non-amplified) speakers are
connected to this output.
Figure 20 shows the back panel connectors.
98
IEEE
1394a
USB 2.0
Coaxial
Devices
S/PDIF
Line Out
Figure 20. Back Panel Connectors
Audio Rear
Left/Right
Line
Out
In
Optical
S/PDIF
Line Out
Audio Center
LFE
RJ45
USB 2.0
Devices
OM15485