Ata/Ide Configuration Submenu - Intel D865PERL Product Manual

ATA/IDE Configuration Submenu

Main Advanced
ATA/IDE Configuration
ATA/IDE Configuration
Legacy IDE Channels
PCI IDE Bus Master
Hard Disk Pre-Delay
SoftRAID Support
` [PATA Primary Master
` [PATA Primary Slave
` [PATA Secondary Master :
` [PATA Secondary Master :
This submenu shown in Table 22 is used to configure ATA/IDE device options.
Table 22.

ATA/IDE Configuration Submenu

Feature
ATA/IDE Configuration • Disabled
Legacy IDE Channels
PCI IDE Bus Master
Hard Disk Pre-Delay
SoftRAID Support
Security Power
[Legacy]
[PATA Pri and Sec]
[Enabled]
[Disabled]
[Enabled]
:
xxxxxxx]
:
Not Detected]
xxxxxxx]
Xxxxxxx]
Options
• Legacy
• Enhanced (default)
• PATA Pri only
• PATA Sec only
• PATA PRI and Sec (default)
• SATA P0/P1 only
• SATA P0/P1, PATA Sec
• SATA P0/P1, PATA Pri
• Disabled
• Enabled (default)
• Disabled (default)
• 3 Seconds
• 6 Seconds
• 9 Seconds
• 12 Seconds
• 15 Seconds
• 21 Seconds
• 30 Seconds
• Disabled (default)
• Enabled
Using the BIOS Setup Program
Boot Exit
m o
n p
Enter
F1
P9
F10
ESC
Description
Specifies the integrated IDE controller.
Disabled disables the integrated IDE controller.
Legacy enables up to two IDE channels for OS
requiring legacy IDE operation.
Enhanced all SATA and PATA resources
Configures PATA and SATA resources for OS
requiring legacy IDE operation.
Allows a PCI device to initiate a transaction as
a master.
Specifies the hard disk drive pre-delay. Causes
the BIOS to insert a delay before attempting to
detect IDE drives in the system.
Enables or disables SoftRAID support.
Select Screen
Select Item
Select ` Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
77