I/O Back Panel Connectors - Intel H61 User Manual

3-2 I/O Back Panel Connectors

PS/2 Mouse
Port
PS/2 Keyboard
Port
*USB 3.0 ports are optional features depending on different model.
(1) PS/2 Keyboard & Mouse Connectors: KB1
The connector is provided to connect PS/2 keyboard or mouse devices.
(2) D-Sub 15-pin Connector: VGA
VGA is the 15-pin D-Subminiature female connector; it is for the display devices,
such as the CRT monitor, LCD monitor and so on.
(3) Digital Visual Interface: DVI1
This interface standard designed to maximize the visual quality of digital display
devices such as flat panel LCD computer displays and digital projectors.
(4) High-Definition Multimedia Interface: HDMI1
This point-to-point interface is for audio and video signals designed as a
single-cable solution for home theater and consumer electronics equipment.
NOTE! DVI and HDMI Connector can not be used at the same time.
(5) USB 3.0 Ports: USB6 (Optional for TI61AG3 series)
These are 4-pin USB 3.0 connectors to connect USB devices to the system
board.
(6) USB 2.0 Port s: from USB4; UL1; USB6 (Optional for TI61AG series)
The connectors are 4-pin USB 2.0 connectors to connect USB devices to the
system board.
(7) LAN Port connector: RJ-45 LAN port from UL1
This connector is standard RJ45 over USB connectors for Network connection.
The connector supports 10MB/100MB/1G B/s data transfer rate
Pin No.
1
2
3
4
5
6
7
VGA Port
Optional
USB 2.0 /3.0 Ports
DVI Port
HDMI Port
Defnition
GND
TXP
TXN
GND
RXN
RXP
GND
RJ-45 LAN Port
USB 2.0 Ports
8
Line-IN
Line-OUT
MIC-IN