HYOSUNG COMET 125 Service Manual page 55

Remove the crankcase securing bolts.
Separate the crankcase into 2 parts, right and left,
with a special tool.
Crankcase separator : 09920-13120
CAUTION
When separating the crankcase , necessarily,
remove it after installed the special tool (Crankcase
separator) on the side of clutch.
In case separate oppositely, the gearshift cam stop-
per will be damaged in the side of magneto.
NOTE
Fit the crankcase separater, so that the tool
arms parallel the side of the crankcase.
Remove the gearshift fork shaft
.
Remove the gearshift cam
Remove the driveshaft assembly
assembly .
Remove the oil pump idle gearshaft
Remove the crankshaft by using the special tool.
Crankcase separator : 09920-13120
and gearshift fork
.
, countershaft
.
ENGINE 3-18