HYOSUNG COMET 125 Service Manual page 101

4-9 FUEL SYSTEM
Install the jet needle with the pin
securely engaged with the hole
valve.
Align the hole of the diaphragm with passage way
on the carburetor body.
Install the eight screw
CAUTION
Never adjust CO adjust screw
tor. If adjust at discretion, have a bad influence
upon output of the engine as the two carburetor
is disharmonious.
After the assembly and installation on the engine
have been completed, perform the following adjus-
ment.
Throttle cable adjustment. (Refer to page 2-7)
Idle speed adjustment. (Refer to page 2-7)
on the spacer
on the piston
of the carbure-