HYOSUNG COMET 125 Service Manual page 128

WHEEL BEARING REMOVAL
Remove the wheel bearing by using the special tool.
Wheel bearing remover : 09941 - 50111
CAUTION
The removed bearing should be replaced with
new ones.
REASSEMBLY
Reassemble the front wheel in the reverse order of
removal and disassembly.
Pay attention to the following points :
WHEEL BEARING
Apply SUPER GREASE A to the wheel bearings.
SUPER GREASE A
Install the wheel bearings as follows by using the
special tools.
Steering race installer : 09941 - 34513
CAUTION
First install the right wheel bearing, then install
the left wheel bearing.
BRAKE DISC
Make sure that the brake disc is clean and free of any
greasy matter.
Apply THREAD LOCK 1324 to the disc mounting
bolts and tighten them to the specified torque.
Brake disc bolt
THREAD LOCK 1324
: 18~28 N m (1.8 ~2.8 kg m)
CHASSIS 6-4