HYOSUNG COMET 125 Service Manual page 115

5-13 ELECTRICAL SYSTEM
STARTER MOTOR REMOVAL AND
DISASSEMBLY
Disconnect the starter motor lead wire
With loosen the bolt
Disassemble the starter motor.
STARTER MOTOR INSPECTION
CARBON BRUSH
Inspect the brushes for abnormal wear, crack
or smoothness in the brush holder.
If the brush has failed, replace the brush sub assy.
COMMUTATOR
Inspect the commutator for discoloration, abnormal
wear or undercut .
If the commutator is abnomally worn, replace the
armature.
When surface is discolored, polish it with #400
sand paper and clean it with dry cloth.
ARMATURE COIL INSPECTION
Check for continuity between each segment.
Check for continuity between each segment and
the armature shaft.
If there is no continuity between the segments or
there is continuity between the segment and shaft,
replace the starter motor with a new one.
Pocket tester : 09900 - 25002
.
, remove the starter motor.
Segment