HYOSUNG COMET 125 Service Manual page 174

Special tools Part Number Part Name Description
09921-20200
Bearing remover(10mm)
Used to remove oil seal or bearing.
09921-20210
Bearing remover(12mm)
Used to remove oil seal or bearing.
09923-73210
Bearing remover(17mm)
Used to remove bearing with the rotor remove sliding shaft.
09923-74510
Bearing remover(20~35mm)
Used to remove bearing with the rotor remove sliding shaft.
09924-84521
Bearing installer
Used to drive small bearing in.
09930-30102
Rotor remove sliding shaft
Used to with bearing remover or rotor remover.
09930-30162
Rotor remover
Attached to the top of sliding shaft when removing rotor.
09930-30164
Rotor remover
Attached to the top of sliding shaft when removing rotor.
09930-40113
Rotor holder
Widely used to lock rotary parts such as a flywheel magneto.
SERVICING INFORMATION 7-10
Special tools Part Number Part Name Description
09930-44510
Rotor holder
Widely used to lock rotary parts such as a flywheel magneto.
09940-10122
Clamp wrench
A hook wrench to adjust the steering head of motorcycle.
09940-34520
T-handle
Remove and remounting front fork oil cylinder.
09940-34561
Front fork assembling tool attachment D
Used with T-handle.
09940-50113
Front fork oil seal installer
Install front fork oil seal.
09941-34513
Steering race installer
Used to install steering outer race.
09941-50111
Wheel bearing remover
Used to remove wheel bearing.
09943-74111
Front fork oil level gauge
Used to drain the fork oil to the specified level.