HYOSUNG COMET 125 Service Manual page 152

Remove the handlebar clamp bolts.
Remove the steering stem head nut
the steering stem upper bracket
Remove the steering stem nut
steering stem.
Clamp wrench : 09940-10122
Take off the steering stem lower bracket
CAUTION
Hold the steering stem lower bracket by hand to
prevent from falling.
Remove the upper and lower bearing
Remove the outer race fitted on the steering stem.
This can be done with a chisel.
Draw out the two inner races fitted to the top and bot-
tem ends of the head pipe.
and take off
.
and draw out the
.
.
CHASSIS 6-28