Recovering Or Installing Device Drivers; Creating And Using An Ibm Enhanced Diagnostics Diskette; Creating An Ibm Enhanced Diagnostics Diskette - IBM 6219 - IntelliStation M - Pro User Manual

Complete the following steps to recover the operating system.
Note: The recovery process replaces all information stored on drive C. If possible,
1. If possible, shut down your operating system normally.
2. If your computer is still on, turn it off.
3. Turn on your computer, and wait for the prompt:
4. Quickly press F11, and wait for the program menu.
5. Select the recovery options you want and follow the instructions on the screen.
6. When recovery is complete, exit from the program. Remove the CD from the
7. Restart the computer.

Recovering or installing device drivers

Restoring the factory-preinstalled device drivers is part of the Product Recovery
program and the Device Drivers and IBM Enhanced Diagnostics CD.
Notes:
1. Before you can recover or install device drivers, your operating system must be
2. Ensure that you have the documentation and software media for the device
3. Device drivers for IBM devices and the instructions to install them (readme.txt)
4. The latest device drivers are also available at http://www.ibm.com/pc/support/ on

Creating and using an IBM Enhanced Diagnostics diskette

The IBM Enhanced Diagnostics diskette is used to test hardware components on
your computer. Use the following information and instructions to create and use an
IBM Enhanced Diagnostics diskette.

Creating an IBM Enhanced Diagnostics diskette

You can use one of the following methods to create an IBM Enhanced Diagnostics
diskette:
v Create a diskette using Access IBM
v Download a program image from the World Wide Web
v Create a diskette from the Device Drivers and IBM Enhanced Diagnostics CD
Complete the following steps to create the diagnostics diskette using Access IBM:
82
IBM IntelliStation M Pro Type 6219: User's Guide
back up your data files before starting this process.
Note: If the computer will not turn off after you hold down the power-control
button for at least 4 seconds, unplug the power cord and wait a few
seconds before reconnecting it.
To start the Product Recovery program, press F11.
If the DOS command prompt or the F11 prompt is not displayed, see "Using the
recovery-repair diskette" on page 84.
CD-ROM or DVD-ROM drive, if you have not already done so.
installed on your computer.
before you start recovering or installing device drivers.
are on the Device Drivers and IBM Enhanced Diagnostics CD and in the
c:\ibmtools\drivers\ directory.
the World Wide Web.