Video Connector - IBM 6219 - IntelliStation M - Pro User Manual

Video connector

The Accelerated Graphics Port (AGP) adapter, which is in the AGP slot on the
system board, provides the video connector. This connector is on the rear of the
computer. Use the video connector to connect a monitor or other display. The
following illustrations are examples of different video connectors.
Analog video connector
Digital (DVI-I) video connector
Low force helical-60 (LFH-60) video connector
Some models come with a digital video interface (DVI) connector for connecting a
digital monitor. If you have problems viewing information with a second monitor, see
"Changing monitor settings" on page 15.
Models with the Wildcat 4 7110 or NVIDIA Quadro4 980XGL video adapter come
with a DVI-I to VGA style analog converter for each DVI-I connector.
Note: On the Wildcat 4 7110 video adapter, the first or only monitor must be
Models with the Matrox Millennium G450 DVI-I video adapter come with a DVI-I to
dual-analog monitor pigtail cable.
Models with the NVIDIA Quadro4 280NVS video adapter come with a low force
helical-60 (LFH-60) to dual-analog monitor pigtail cable. If you want to set up two
digital monitors, you will need to purchase a separate dual-digital monitor cable.
connected to the bottom connector (connector number 1).
5 1
15 11
C1 C2
1
C3 C4
C5
Chapter 4. Installing options
53