Sharp ER-A450T Service Manual page 42

No Procedure on P.C. side
7 Communication starts.
8 UpLoad is completed.
The initial Window is shown.
"Push "Exit" Button."
9 ALL RAM Data Download ( PC -> ER-A450T )
10 Execute "02FD.EXE" on P.C
*Don' t execute the other Software at the same time.
11 Set the Communication method by "Setting" Button.
Push "OK" Button.
13 Push "PC -> POS" Button.
And Select the Receiving File.
14 Communication starts.
15 Download is completed.
The initial Window is shown.
Push "Exit" Button.
No Procedure on ER-A450T side
6 Entry of JOB#996 in the SRV mode
996
ER-A450T shows
8 UpLoad is completed.
9 Place the SRV key in the SRV mode.
12 Entry of JOB#998 in the SRV mode
998
ER-A450T shows
15 Download is completed.
16 Execute "Service Reseth" on ER-A450T
6 – 5
@/FOR
CA/AT
00000
@/FOR
CA/AT
00000