Display The Mac Filter Summary - NETGEAR S3600 Series User Manual

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
6. From the MAC Filter menu, select the MAC filter.
7. Click the Delete button.
Your settings are saved and the MAC filter is removed.

Display the MAC filter summary

You can display the MAC filters that are configured on the switch.
To display the MAC filter summary:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network,
or connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser and enter the IP address of the switch in the address field of
your web browser.
If you do not know the IP address of the switch, see Access the switch on-network
and connected to the Internet on page 25 or Access the switch off-network and not
connected to the Internet on page 32.
The Device Admin Password page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
4. Click the Login button.
The Dashboard page displays.
5. Select Security > Traffic Control > MAC Filter.
The MAC Filter page displays.
The following information refers to the MAC Filter Summary section.
6. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Manage Switch Security 422 User Manual