Dhcp - TP-Link TL-WR702N User Manual

Near the center of the area in which your wireless stations will operate.
In an elevated location such as a high shelf.
Away from the potential sources of interference, such as PCs, microwaves, and cordless
phones.
Away from large metal surfaces.
2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.

6.7 DHCP

Figure 6-9 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 6-9), DHCP Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
6.7.1 DHCP Settings
Choose menu "DHCP → DHCP Settings", and then you can configure the DHCP Server on the
page as shown in Figure 6-10. The Router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the Router in the LAN.
TL-WR702N 150Mbps Wireless N Nano Router
- 112 -