Panel Layout - TP-Link TL-WR702N User Manual

1.4 Panel Layout

LED
Status
Solid
Flashing
Slowly
Flashing
Quickly
LAN/WAN: This LAN/WAN port works as LAN in AP/Repeater/ Bridge/Client mode and as
WAN in Router mode. As LAN, it connects the Router to the local PC; as WAN, it enables
you connect the DSL/cable Modem, or Ethernet.
Power: This port is used to connect the provided power adapter.
Reset：It is used to reset the Router to its factory defaults. With the Router powered on, use
a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes
quick-flash from slow-flash. And then release the button and wait the Router to reboot to its
factory default settings.
TL-WR702N
Figure 1-1 TL-WR702N sketch
It's powered on but the LAN/WAN port is not connected.
The LAN/WAN cable is connected but there is no data
being transmitted or received.
The LAN/WAN cable is connected and there is data being
transmitted or received.
Table 1-1 The LED Description
- 4 -
150Mbps Wireless N Nano Router
Indication