TP-Link TL-WR702N User Manual page 125

Click the Restore button to reset all configuration settings to their default values.
•
The default User Name: admin
•
The default Password: admin
•
The default IP Address: 192.168.0.254
•
The default Subnet Mask: 255.255.255.0
Note:
All changed settings will be lost when defaults are restored.
6.8.4 Backup & Restore
Choose menu "System Tools → Backup & Restore", and then you can save the current
configuration of the Router as a backup file and restore the configuration via a backup file as
shown in Figure 6-19.
Click the Backup button to save all configuration settings as a backup file in your local
computer.
To upgrade the Router's configuration, follow these instructions.
•
Click the Browse... button to locate the update file for the Router, or enter the exact path
to the Setting file in the text box.
•
Click the Restore button.
Note:
The current configuration will be covered by the uploading configuration file. The upgrade process
lasts for 20 seconds and the Router will restart automatically. Keep the Router on during the
upgrading process to prevent any damage.
TL-WR702N
Figure 6-18 Restore Factory Default
Figure 6-19 Backup & Restore Configuration
- 119 -
150Mbps Wireless N Nano Router