TP-Link TL-WR702N Quick Installation Manual

Quick Installation Guide

150Mbps Wireless N Nano Router
TL-WR702N
MODEL NO.
3 Repeater Mode
TL-WR702N is used to extend the range of wireless signal
of the existing AP or wireless router.
Instant Wireless Connection
For Windows XP
Enter the Network key(
1 Click the wireless icon at the 2
bottom of your desktop. Click Confirm network key. Click Connect.
Refresh network list, and then
select the default SSID( 1). Click
Connect.
1. The default SSID of the network is TP-LINK_xxxxxx which is the SSID on the label.
2. The pre-encryption function is enabled by default and the default Network key/Security key is the Password on the
label. The password is case-sensitive.
Advanced Web Management
1
Configure PC
Go to Start > Control Panel > View Double click Internet Protocol
1 2
network status and tasks > Change Version 4 (TCP/IPv4) in the item
adapter settings. Right click Wireless list.
Network Connection, and select
Properties.

Package Contents

TL-WR702N Ethernet Cable
USB Cable
Power Adapter
150Mbps Wireless N Nano Router
MODEL NO. TL-WR702N
Resource CD QIG
Hardware Introduction
Before hardware connection, please write down the
SSID and Password of your TL-WR702N on the label
for later use. Both are case-sensitive.
*
SSID: Wireless Network Name of TL-WR702N.
*
Password: Pre-encryption password of TL-WR702N.
(This method is for connecting to the default AP Mode. If you want to configure AP Mode or choose other modes, please skip to Advanced Web Management.)
If you can see Connected as shown
2), and then 3
in the following screen, you've
successfully connected to the
wireless network.
(Here we take Windows 7 as an example.)
Specify the IP address as 192.168.0.x
3
(x is from 1 to 253), and the Subnet
mask as 255.255.255.0. Type the
Router's LAN IP address (the default
IP is 192.168.0.254) into the Default
gateway field. Click OK.
Three Typical Working Modes
1 AP Mode ( )
default mode
The default operation mode is AP mode. In this mode,
TL-WR702N can convert wired network to wireless network.
Wired Network
Cable
Hardware Connection
Internet
3
2
4
1
Step 1: Connect one end of the provided USB cable to micro USB port of
TL-WR702N.
Step 2: Connect the other end of the provided USB cable to the power
adapter.
Step 3: Plug in standard electrical wall socket directly to power the Router.
Step 4: For AP Mode and Router Mode, connect the LAN/WAN port of
TL-WR702N to Internet with an Ethernet cable. For another modes,
you can refer to the User Guide in the Resource CD.
For Windows 7
Enter the Security key(
1 Click the icon at the bottom 2
of your desktop. Click refresh
button, and then select the
default SSID( 1). Click Connect.
2

Connect to Network

Click the wireless icon at the
1 2
bottom of your desktop. Click
refresh button, and then select
the default SSID( 1). Click
Connect.
1. The default SSID of the network is TP-LINK_xxxxxx which is the SSID on the label.
2. The pre-encryption function is enabled by default and the default Security key is the Password on the label. The
password is case-sensitive.
Router Mode
2
As a wireless router, TL-WR702N enables multi-user to share
Internet via DSL/Cable Modem.
TL-WR702N LED:
Status Indication
It's powered on but the LAN/WAN port is not
Solid
connected.
The LAN/WAN cable is connected but there is
Flashing Slowly
no data being transmitted or received.
The LAN/WAN cable is connected and there is
Flashing Quickly
data being transmitted or received.
Power Reset
LAN/WAN
LAN/WAN
: This port works as LAN in AP/Repeater/ Bridge/Client
mode and as WAN in Router mode.
Power
: This port is used to connect the provided power adapter.
Reset：It is used to reset the TL-WR702N to its factory defaults.
For more detailed information about Reset, please refer to
Appendix: Troubleshooting.
2). Click OK. If you can see Connected as shown
3
in the following screen, you've
successfully connected to the
wireless network.
Enter the Security key( 2). If you can see Connected as shown
3
Click OK. in the following screen, you've
successfully connected to the
wireless network.