TP-Link TL-WR702N User Manual page 126

6.8.5 Reboot
Choose menu "System Tools → Reboot", and then you can click the Reboot button to reboot
the Router via the next screen.
Some settings of the Router will take effect only after rebooting, including:
•
Change the LAN IP Address (system will reboot automatically).
•
Change the DHCP Settings.
•
Change the Wireless configurations.
•
Change the Web Management Port.
•
Upgrade the firmware of the Router (system will reboot automatically).
•
Restore the Router's settings to factory defaults (system will reboot automatically).
•
Update the configuration with the file (system will reboot automatically.
6.8.6 Password
Choose menu "System Tools → Password", and then you can change the factory default user
name and password of the Router in the next screen as shown in Figure 6-21.
TL-WR702N
Figure 6-20 Reboot the Router
Figure 6-21 Password
- 120 -
150Mbps Wireless N Nano Router