Table of Contents
Advertisement
Choosing how pcAnywhere Gateway discovers hosts
Adding or removing a subnet for Gateway host searches
Docking to a Symantec pcAnywhere Access Server
You can choose the User Datagram Protocol (UDP) traffic level setting that
pcAnywhere Gateway uses to search for pcAnywhere hosts.
To choose how pcAnywhere Gateway discovers hosts
1
In the Gateway Manager window, on the Edit menu, click Preferences.
2
In the Preferences window, on the Connectivity tab, in the UDP traffic level
when searching for hosts list, select one of the following:
Burst
Broadcast
3
Click OK.
If you have pcAnywhere hosts that are distributed across multiple subnets, you
can add these subnets to Symantec pcAnywhere Gateway so that remote users
can connect. You can also remove subnets from Symantec pcAnywhere Gateway
when you no longer need them.
To add a subnet for Gateway host searches
1
In the Gateway Manager window, on the Edit menu, click Preferences.
2
In the Preferences window, on the Connectivity tab, under Subnets to find
hosts, type the IP address of the subnet that you want to add.
3
Click Add.
4
Click OK.
To remove a subnet from Gateway host searches
1
In the Gateway Manager window, on the Edit menu, click Preferences.
2
In the Preferences window, on the Connectivity tab, under Subnets to find
hosts, select the IP address of the subnet that you want to remove.
3
Click Remove.
4
Click OK.
If your remote access environment includes Symantec pcAnywhere Access Server,
you can configure pcAnywhere Gateway to dock to the Access Server. Remote
users who connect to the Access Server can see the gateway computer and connect
to an available host.
Managing Symantec pcAnywhere Gateway
About the Gateway Manager
303
Advertisement
Table of Contents
