Table of Contents
Advertisement
240
Connecting across multiple platforms
Securing CrossPlatform connections
Changing subnet settings for CrossPlatform host searches
4
In the Password box, type the password.
5
In the Confirm Password box, retype the password.
6
To encrypt the data stream between the host and remote computers, under
Encryption, in the Encryption Level list, select one of the following:
pcAnywhere encoding
Symmetric, RC4, 40 bit
Symmetric, RC4, 128 bit
Symmetric, AES, 128 bit
Symmetric, AES, 192 bit
Symmetric, AES, 256 bit
7
To cancel the host after a remote user ends the session, check Terminate
host after session.
8
To protect your computer from unauthorized connections, check Prompt to
confirm connection.
Select the number of seconds that you have to respond to the prompt. If the
timeout period expires before you respond to the prompt, pcAnywhere
CrossPlatform cancels the session.
9
To embed a serial number in the host configuration to prevent unauthorized
connections, check Assign Serial ID.
In the ID number box, type the serial number that you want to use for your
host sessions. Serial numbers must be a numeric value between 0 and 65,535.
Remote users must configure their connections to use the same number.
10
Do one of the following:
To save the host settings without starting a session, click OK.
To save the host settings and start a session, click Launch.
Symantec pcAnywhere CrossPlatform automatically searches the local subnet
for pcAnywhere host computers that are running. If you have pcAnywhere hosts
that are distributed across different subnets, you can add those subnets to the
host searches in CrossPlatform.
Advertisement
Table of Contents
