Table of Contents
Advertisement
200
Securing your computer and sessions
About access rights
Blocking connections by days or times
5
Under Time limits, select any of the following:
Limit time allowed per
session
Caller subject to
inactivity timeout
6
Select the number of minutes.
7
Click OK.
You can block a user or group of users from connecting to a host computer on
certain days or times. This lets you control the amount of time that a host computer
is available for connections. For example, you can block remote users from
connecting to your computer at a time of day when you will be running a critical
task.
To block connections by days or times
1
In the Symantec pcAnywhere window, in Advanced View, on the left
navigation bar, click Hosts.
2
In the right pane, under Hosts, right-click the connection item that you want
to configure, and then click Properties.
3
In the Host Properties window, on the Callers tab, right-click the caller item
that you want to configure, and then click Properties.
4
In the Caller Properties window, on the Security tab, check Set day and time
restrictions for this caller.
5
Click Day and Time Restrictions.
6
In the Caller Day and Time Restrictions window, select the days of the week
on which you want to restrict access.
If the box next to the day is checked, connections are restricted between the
times that are listed. If the box next to the day is clear, there are no day or
time restrictions.
7
In the Between drop-down list, select the time of day in which the time
restriction starts for that day.
Automatically disconnects the remote user after a specified
period of time
Automatically disconnects the remote user if there has
been no keyboard or mouse input for a specified period of
time
Advertisement
Table of Contents
