Table of Contents
Advertisement
78
Allowing others to control your computer
Ways to set up a host computer
Configuring an ISDN connection on a host
To configure a host modem connection
1
In Advanced View, on the left navigation bar, under pcAnywhere Manager,
click Hosts.
2
In the right pane, under Hosts, do one of the following:
To edit an existing connection item, right-click the item, and then click
Properties.
To create a new connection item, on the File menu, click New Item >
Advanced.
3
In the Host Properties window, on the Connection Info tab, select the name
of your modem.
4
On the Callers tab, configure a user name and password for users who can
connect to the host.
See
"About authentication in pcAnywhere"
5
Click OK.
To change the number of rings for incoming modem connections
1
In the Symantec pcAnywhere window, on the Edit menu, click Preferences.
2
In the pcAnywhere Options window, on the Host Communications tab, under
Dial-up properties, select the number of times the connection rings before
the host answers the incoming call.
3
Click OK.
Integrated Services Digital Networks (ISDNs) are digital telephone services that
can transmit digital and voice data at much faster speeds than traditional modems.
The configuration for an ISDN device is similar to that of a modem.
Symantec pcAnywhere supports ISDN only in North America and Europe. If an
ISDN device is installed and configured properly on your computer, pcAnywhere
automatically detects it and adds it to the connection device list. Choose this
device only if you are using ISDN in North America. If you are using ISDN in
Europe, you must select ISDN via CAPI 2.0.
Symantec pcAnywhere requires a user name and password for all host sessions.
To connect, the remote user must know the user name and password as well as
the phone number assigned to the host ISDN device.
on page 190.
Advertisement
Table of Contents
