Connecting To A Host By Manually Entering Connection Information - Symantec PCANYWHERE 12.0 User Manual

256 Connecting from a Web browser
Ways to connect to a host through Web Remote

Connecting to a host by manually entering connection information

5
In the Configure TCP/IP dialog box, in the Enter subnet to search box, type
the subnet address that you want to search.
To search a subnet, type the first three octets of the subnet. Then, type either
.0 or .255 as the fourth octet. For example:
172.16.0.255 or 172.16.0.0
6
Click OK.
7
Double-click the host computer to which you want to connect.
8 In the Authentication dialog box, next to Login Name, type your logon name.
9 In the Password box, type your password.
If you are connecting to a host that is configured for Windows NT
authentication, you will also be prompted for a domain name.
10
Click OK.
You can connect to a host computer by manually entering the IP address or
computer name of the host computer.
To connect to a host by manually entering connection information
1
In the Symantec pcAnywhere Web Remote window, click Advanced.
2
In the Advanced Options window, under Encryption, configure your encryption
settings.
3 Click OK.
4
In the Symantec pcAnywhere Web Remote window, under Manual entry, type
the computer name or IP address of the host computer to which you want to
connect.
5
Click Connect.
6
In the Authentication dialog box, next to Login Name, type your logon name.
7
In the Password box, type your password.
If you are connecting to a host that is configured for Windows NT
authentication, type your domain name.
8
Click OK.