Including Logon Information In Your Mobile Connections - Symantec PCANYWHERE 12.0 User Manual

272 Connecting from a mobile device
Ways to connect another computer from a mobile device

Including logon information in your mobile connections

5
On the following tabs, configure the options that you want to use:
Auto Login
Server
Security
Ports
6
Do one of the following:
To save the connection settings without starting a connection, on the
navigation bar, tap OK.
To connect to the host computer, on any properties tab, tap Connect.
Symantec pcAnywhere requires a user name and password for all host sessions.
To connect to a pcAnywhere host computer, you must know the information that
is needed to log on.
You can include this logon information in the connection item. This lets you
automatically log on to the host computer upon connection. If you do not include
the logon information in the connection item, you will be prompted for the logon
information upon connection.
You can include logon credentials to automatically log on to the
host computer upon connection. If you do not provide this
information, you will be prompted for your logon credentials
upon connection.
See "Including logon information in your mobile connections"
on page 272.
Note:
If you are using remote management, you might be
prompted for additional logon credentials, depending on how
the host computer is configured.
If you want to connect through a pcAnywhere Gateway or Access
Server, you can provide the IP address and the logon information
that is needed to connect.
See "Connecting through a pcAnywhere Gateway or Access
Server" on page 273.
You can select encryption settings to protect the exchange of
data between the host computer and your device.
See "Encrypting your mobile sessions"
You can specify the alternate ports that the host computer is
using, if necessary.
See "Specifying the host ports for mobile connections"
on page 274.
on page 276.