Symantec NORTON GHOST PERSONAL EDITION User Manual page 62

Appendix A: Norton Ghost command-line switches
Skips files as outlined in the skipfile.txt file. For example, the skipfile.txt
contains:
*\*.tmt
[partition:1]
\windows\
*\*.exe
[Partition:2]
*\*me.txt
This would skip all *.tmt files on any partition, the windows directory and
any *.exe files on the first partition, and any file that ended with the me.txt
on the second partition.
-sleep=x
Slows Norton Ghost operation. The greater the x value, the slower Norton
Ghost will operate.
-span
Enables spanning of image files across volumes.
-split=x
Splits image file into "x" MB spans. Use this to create a forced size volume
set. For example, if you would like to force smaller image files from a 1024
MB drive, you could specify 200 MB segments. For example,
ghostpe.exe -split=200
will divide the image into 200 MB segments.
-tapebuffered
Default tape mode. Sets the ASPI driver to report a read/write as successful
as soon as the data has been transferred to it. Useful when using older or
unreliable tape devices or sequential media.
-tapeeject
Forces Norton Ghost to eject the tape following a tape operation. Earlier
versions ejected the tape by default. By default, Norton Ghost does not
eject the tape and rewinds the tape before exiting to DOS.
-tapesafe
62