Symantec NORTON GHOST PERSONAL EDITION User Manual page 30

Chapter 3: Using Norton Ghost
3
4
30
Specify the drive or device and select the full pathname. Note that the
image file may reside on a local drive (but not the one that is being
copied to). When using peer-to-peer connections, the file will be
located on the slave machine. On pressing enter, the Destination
Drive dialog box displays.
Select the destination drive.
The Destination Drive dialog box displays the details of every drive
Norton Ghost can find on the local machine. The disk containing the
source image file is not available for selection. On selection of the
destination drive, the Destination Drive Details dialog box displays.
Warning: Choose carefully as this is the disk that is going to get
overwritten.
Confirm or change the destination drive partition layout.
The Destination Drive Details dialog box displays a suggested
partition layout for the destination drive. By default Norton Ghost
allocates any extra space that the new disk has to the first FAT or
NTFS partition that it discovers.
You can change the size of any target FAT or NTFS partition at this
stage simply by entering the new size in megabytes.
You cannot enter a value that exceeds the available space, is beyond
the file systems limitations, or is not large enough to contain the data