Symantec NORTON GHOST PERSONAL EDITION User Manual page 48

Appendix A: Norton Ghost command-line switches
-clone,mode=pdump,src=1:2,dst=g:\part2.gho
-fcr
-afile=filename
Overrides the default abort error log file (ghost.err) to the directory and file
given in filename.
-autoname
Automatically names spanned image files during creation. Avoids the user
prompt asking for confirmation of the next destination location for the
remainder of the image file.
-bfc=x
Handles bad FAT clusters when writing to disk. If this switch is set, and the
target partition is FAT, Norton Ghost will try to work around bad sectors.
The "x" value indicates the maximum number of bad sectors allowed to be
handled by Norton Ghost. The default value is 500. Norton Ghost will abort
when a bad sector is encountered in a non-FAT partition; after the
maximum number of bad clusters is exceeded; or if the switch is not
selected.
-chkimg,filename
Checks the integrity of the image file indicated by filename.
-clone
The full syntax for this switch is:
-
clone
ve|file|drive:partition|
ion|
Clone operation switch. Note that no spaces are allowed in the command
line. This switch allows automation of Norton Ghost operations and has a
series of arguments that define the operation parameters:
48
MODE= copy load
, { |
@MT SZE E|F L|
x}, { |
dump pcopy pload
| | |
@MT DST=
x}, {drive|file|drive:partit
= M P|F|V
n {nnnn |nn }
pdump SRC=
| }, {dri