Cloning From Partition To Image File - Symantec NORTON GHOST PERSONAL EDITION User Manual

Chapter 3: Using Norton Ghost
Warning: Choose carefully as this is the partition that is going to be
overwritten.
6
7
Cloning from partition to image file
To clone a partition to an image file:
1
2
34
Check the details displayed and ensure the correct options have
been selected. Do one of the following:
Select Yes to proceed with the partition copy.
If you need to abort the process use Ctrl-C, but be aware that this
leaves the destination drive in an unknown state.
Warning: Only select Yes if you are really sure you want to
proceed. The destination partition will be completely overwritten
with no chance of recovering any data.
Select No to return to the menu.
When the partition copy is complete, reboot the destination
machine. Norton Disk Doctor, ScanDisk, or a similar utility can
then be run to verify the integrity of the destination partition.
From the main menu, select Partition > To Image.
The Source Drive dialog box displays.
Select the source drive.