Symantec NORTON GHOST PERSONAL EDITION User Manual page 57

Displays the fingerprint details written on a hard disk drive created by
Norton Ghost. The fingerprint displays the process used to create the drive
or partition and the time, date, and disk the operation was performed on.
-fnf
Disables the creation of a fingerprint when cloning hard disk drives or
partitions. Similar to the functionality environment switch FPRNT=N.
-fni
Disables direct IDE Access support for IDE hard disk operations.
-fns
Disables direct ASPI/SCSI access support for SCSI hard disk operations.
-fnw
Disables writing to FAT disks or partitions. Similar to the functionality
environment switch WRITE=N. This switch does not work with NTFS
volumes.
-fnx
Disables Extended INT13 support during cloning and disk geometry
detection.
-fro
Forces Norton Ghost to continue cloning even if source contains bad
clusters.
-fx
Flag Exit. Causes Norton Ghost to exit to DOS after operation completion.
By default, Norton Ghost prompts the user to reboot or exit when the
operation has finished.
-h
Displays the Norton Ghost command-line switch help page.
-ia
Image All. The Image All switch forces Norton Ghost to do a sector-by-
sector copy of all partitions. When copying a partition from a disk to an
Command-line switches
57