Symantec NORTON GHOST PERSONAL EDITION User Manual page 56

Appendix A: Norton Ghost command-line switches
Norton Ghost. This switch may also assist when tape drives are incorrectly
reported as drives. Valid values for number are 128 to 255.
-f32
Allows Norton Ghost to convert all FAT16 volumes to FAT32 volumes when
the destination partition is larger than 2047 MB in size. Caution: ensure that
the installed operating systems requiring access to the volumes that will be
converted support FAT32.
-f64
Allows Norton Ghost to resize FAT16 partitions to be greater than 2047 MB
using 64K clusters. This is only supported by Windows NT. Do not use on
systems including other operating systems.
-fatlimit
Limits the size of NT FAT16 partitions to 2047 MB. Useful when Windows
NT OS FAT16 partitions are present on the disk, and 64K clusters are not
wanted.
-fcr
Creates a CRC32 file (called ghost.crc) while creating an image file.
-ffi
Forces the use of direct IDE access for IDE hard disk operations. By
default, direct IDE access is only used for disks greater than 1024 cylinders
when Extended Int13 is not supported. This switch does not have any
effect when running Norton Ghost in Windows 95/98.
-ffs
Prefer the use of direct ASPI/SCSI disk access for SCSI hard disk operations.
-ffx
Prefer the use of Extended Interrupt 13h disk access for hard disk
operations.
-finger
56