Results-Based Actions Settings In Software Management Solution - Symantec ALTIRIS 7.0 SP2 - MANAGEMENT SOLUTION Manual

Option
User must turn on from
Altiris Agent
Prompt user when this
policy is available

Results-based actions settings in Software Management Solution

Options in the User run conditions section (continued)
Table 3-8
Description
Requires the user to run the policy. If you select this option, the policy never runs
automatically.
This check box is available only if you checked the following check box: Allow user
to turn on policy from the Altiris Agent.
The user can run the policy by clicking it on the Software Delivery tab that is on the
Altiris Agent.
The user can also run the policy by clicking Start Task Now on the New Software is
Available dialog box, if the following conditions are met:
If you check Prompt user when this policy is available on their computer for the
policy.
If the Show popup notifications check box is checked on the client computer s
Altiris Agent.
In a Managed Software Delivery policy, this check box appears on the Policy settings
tab.
Displays a message to notify the user that new software is available. When the user
clicks the message, the New Software is Available dialog box opens. The user can
start, dismiss, or defer the policy. If you do not choose to prompt the user, the New
Software is Available dialog box does not appear.
This check box is available only if you checked the following check box: Allow user
to turn on policy from the Altiris Agent.
The New Software is Available dialog box appears only if the Show popup
notifications option is selected on the client computer s Altiris Agent.
In a Managed Software Delivery policy, this check box appears on the Policy settings
tab.
These settings let you define the actions that occur during or after the Software
Management Solution policy runs on the client computer.
These settings appear in the following places:
Configuring Software Management Solution settings
Run settings in Software Management Solution
67