Table of Contents
Advertisement
Schedule settings for Managed Software Delivery
To configure default settings for Managed Software Delivery
1
In the Symantec Management Console, on the Settings menu, click All
Settings.
2
In the left pane, under Settings, click Software > Managed Delivery Settings.
3
On the Managed Delivery Settings page, complete the following tabs to
configure the specific settings:
Schedule tab
Download tab
Run tab
4
When you finish the configuration, click Save changes.
The Schedule settings let you define the schedule on which a Managed Software
Delivery policy runs. You schedule the compliance check and the remediation
action separately.
Managed Software Delivery policies perform compliance checks and remediations.
A compliance check uses either the software resource s unique identifier or its
detection rule to determine the state of the software on a managed computer. If
the software is not in the correct state, the compliance check fails and remediation
occurs. The nature of the remediation depends on the action that the Managed
Software Delivery policy performs. For example, the remediation can consist of
installing or uninstalling the software.
See
"About policy applicability, compliance, and remediation"
The Schedule settings appear in multiple places in the Symantec Management
Console as follows:
Configuring Software Management Solution settings
Schedule settings for Managed Software Delivery
Lets you define the schedule on which a Managed Software
Delivery policy runs.
See
"Schedule settings for Managed Software Delivery"
on page 55.
Lets you define how a Managed Software Delivery policy s
downloads are handled.
See
"Download settings in Software Management Solution"
on page 58.
Lets you define how a Managed Software Delivery policy
runs on the client computer.
See
"Run settings in Software Management Solution"
on page 61.
55
on page 102.
Advertisement
Table of Contents
