Symantec ALTIRIS 7.0 SP2 - MANAGEMENT SOLUTION Manual page 123

Table 6-13
User s option
Choose when to run the
policy or choose not to
run the policy
Defer a restart or a
logoff
Software delivery deferral options for the user (continued)
Description
You might let the user control the
execution when the software is
optional or is not critical for that
user.
You can set a Managed Software
Delivery policy to require a restart
or a logoff after the task finishes.
Because the restarts and logoffs
can cause a user to lose unsaved
work, you can let the user defer
them.
Performing advanced software deliveries
About software delivery deferral options for the user
Location of the settings
The settings for this
option appear in the
following places:
On the Managed
Delivery Settings
page, on the Run tab,
under User run
conditions.
See "User run
conditions settings in
Software Management
Solution" on page 63.
In an existing Managed
Software Delivery
policy, on the Policy
settings tab.
See "Policy Rules/Actions:
Policy settings tab"
on page 119.
The settings for this
option appear in the
following places:
On the Managed
Delivery Settings
page, on the Run tab,
under Results-based
actions.
In an existing Managed
Software Delivery
policy, in the
Advanced options
dialog box, on the
Results-based actions
tab.
See "Run settings in
Software Management
Solution" on page 61.
Settings
The settings are as
follows:
Allow user to turn on
policy from the Altiris
Agent
(Optional) User must
turn on from Altiris
Agent
Note:
The policy s
remediation options
override this setting and
its related settings.
The required settings are
as follows:
Upon success run
Lets you specify
whether to require a
restart or a logoff after
the policy runs
successfully.
Allow user to defer
action up to
Lets you allow the user
to defer the
post-execution action
up to the maximum
amount of time that
you select.
123