Page of 240

SYMANTEC ALTIRIS 7.0 SP2 - MANAGEMENT SOLUTION Manual: Configuring The Software Portal Settings

Configuring the Software Portal settings

Before you use the Software Portal, configure the settings that customize its
behavior and appearance. You can change these settings at any time after you
implement the Software Portal.
This task is a step in the process for implementing the Software Portal.
See
"Implementing the Software Portal"
To configure the Software Portal settings
1
In the Symantec Management Console, on the Settings menu, click All
Settings.
2
In the left pane, under Settings, click Software > Software Portal Settings>
Software Portal Settings.
3
On the Software Portal Settings page, in the Maximum number of open
requests per user box, type the number of requests that a user can have open
at any time. The default number of requests is three, which is the
recommended number.
A user who exceeds the allowed number of requests cannot create a new
request until one of their other requests is closed.
A Managed Software Delivery policy that contains dependencies or multiple
tasks counts as one request.
4
On the Software Portal Settings page, under UI Settings, specify the following
information:
Company logo
Configuring the Software Portal settings
on page 173.
Lets you brand the Software Portal with your organization s logo
or another image.
Specify an image file to add to the Software Portal display. The
image appears in the upper-right corner of the Software Portal
window.
Specifications for the image file are as follows:
Format: JPG, GIF, BMP, PNG.
Maximum recommended image dimensions: 80 pixels wide
by 20 pixels high.
Image resolution: The resolution is not restricted but we
recommend a low resolution such as 72 pixels per inch to
conserve bandwidth.
Setting up the Software Portal
181

   Related Manuals for SYMANTEC ALTIRIS 7.0 SP2 - MANAGEMENT SOLUTION

Comments to this Manuals

Symbols: 0
Latest comments: