Tail Boom Adjustment / 尾管調整 - THUNDER TIGER TITAN X50 Instruction Manual

Tail Boom Adjustment /
Ensure both the main & tail rotor heads rotate
effortlessly in correct direction: turn the Main Gear
clockwise, the Main Rotor Grips turn clockwise, and the
Tail blades turn counter clockwise.
請確認主旋翼及尾旋翼皆旋轉方向正確且順暢：當順時針撥動
主齒輪時，主旋翼轉座順時針、尾旋翼逆時針轉動。
1. Pull the Tail Boom out slightly by grasping the Tail Unit with one hand and the main frame set with the other. Adjust until the belt
deflects by about 0.5mm (3/16").
2. Tighten the Socket Screws on the Tail Boom Bracket, Tail Support Bracket & Tail Boom Clamp.
3. Attach the Tail Boom Support onto the Main Frames as drawing.
1. 一手固定主側板組，一手握住尾部將尾管向外拉，使皮帶拉緊。適當的皮帶緊度應於推壓皮帶時陷下少於0.5mm (3/16")。
2. 將尾管固定座、支撐桿固定座及尾管止擋環上螺絲鎖緊。
3. 依圖示將尾管支撐桿鎖附上主側板組。
Screw Driver
螺絲起子
-23-
Screw Driver
螺絲起子