THUNDER TIGER Titan x50 Instruction Manual
  1. Manuals
  2. Brands
  3. THUNDER TIGER Manuals
  4. Toy
  5. TITAN X50 -
  6. Instruction manual

THUNDER TIGER Titan x50 Instruction Manual

Hide thumbs Also See for Titan x50:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
Belt-driven Version
This radio control model is not a toy! Before beginning assembly, please read
this manual thoroughly.
本產品為高性能模型非一般玩具，組裝與操作前請詳閱本產品說明書。
The contents are subject to change without prior notice due to product
improvements and specification changes.
本套件所附之零件可能跟圖示有所差異。因產品後續之設計研發或功能不斷改善之原
因，我們將保留產品規格變更權力，不再另行通知使用者。
INSTRUCTION MANUAL
INSTRUCTION MANUAL
組裝說明書
組裝說明書
No.4855

Advertisement

Table of Contents
loading

Related Manuals for THUNDER TIGER Titan x50

Summary of Contents for THUNDER TIGER Titan x50

  • Page 1 All manuals and user guides at all-guides.com INSTRUCTION MANUAL INSTRUCTION MANUAL 組裝說明書 組裝說明書 Belt-driven Version No.4855 This radio control model is not a toy! Before beginning assembly, please read this manual thoroughly. 本產品為高性能模型非一般玩具，組裝與操作前請詳閱本產品說明書。 The contents are subject to change without prior notice due to product improvements and specification changes.

  • Page 2: Table Of Contents

    Electric Device Connection / 電子設備連接說明 Configuring The Titan X50 / Titan X50 設定 Radio and Control Linkage Setup For Titan X50 遙控器設定 & Collective Pitch Setup 螺距設定 Setting Up Data For Your Reference 參數設定參考 Tail Control And Gyro Setup 尾舵控制及陀螺儀控制...

  • Page 3: Intro & Caution / 簡介與注意事項

    All manuals and user guides at all-guides.com INTRODUCTION / 簡介 Thank you for purchasing the Thunder Tiger Titan X50 engine R/C helicopter. This new helicopter is the latest innovation by Thunder Tiger. It has the perfect combination of flying stability and the agility for 3D flying.
  • Page 4 All manuals and user guides at all-guides.com FLIGHT SAFETY CHECKLIST / 飛行前安全確認工作項目 1. Make sure that the transmitter battery is fully charged before flying. 2. Make sure all control surfaces are operated properly before flying. 3. Do a range check of the radio before the first flight. The electronic equipment must operate properly at a range of at least 5 meters (18 ft) even with the transmitter antenna collapsed.

  • Page 5: Other Items Required / 其餘必須配件

    All manuals and user guides at all-guides.com OTHER ITEMS REQUIRED 需自行準備的配件 RADIO SET / 遙控系統 Receiver Battery Switch Harness 接收機電池 1000mAh 接收機 具備充電線的開關組 Transmitter (helicopter type Servo x 5 Gyro only, 6 or more channels) 伺服機x 5個 陀螺儀 發射機（需具備直昇機控制功能 （部分陀螺儀會指定 的6動以上遙控器）...
  • Page 6 SYMBOLS USED THROUGHOUT THE MANUAL / 符號說明 The parts in the Titan X50 are packed according to each major assembly steps. The part number and quantity are always shown in the square box on each page. As good practice, only open up the bag that you need for the paticular assembly.

  • Page 7: Assembly / 組裝步驟

    All manuals and user guides at all-guides.com ASSEMBLY / 組裝步驟 Main Rotor-1 / 主旋翼機構組裝-1 Bag A Material No. Description Material No. Description 名稱 名稱 金屬主旋翼固定座 內六角螺絲,M2.5×8 BV2181 HMC25-8B METAL MAIN ROTOR HUB SOCKET SCREW,M2.5×8 金屬穩定桿固定座 金屬旋翼頭制動器 BV2186 BK2182 METAL SEESAW HUB METAL HEAD BUTTON 軸環,d3xD4xW3.8 金屬混控臂...
  • Page 8 All manuals and user guides at all-guides.com Main Rotor-2 / 主旋翼機構組裝-2 Bag B Material No. Description Material No. Description 名稱 名稱 軸環,d3xD4xW6 BK0077 COLLAR,d3xD4xW6 HME4-5B SET SCREW,M4x5 無頭內六角螺絲,M4x5 半圓頭內六角螺絲,M3x10 HSA3-10 BUTTON HEAD SOCKET SCREW,M3x10 BK0631 SUS FLYBAR 穩定桿 BK0002 FLYBAR CONTROL ARM 穩定翼轉臂...
  • Page 9 All manuals and user guides at all-guides.com Main Rotor-3 / 主旋翼機構組裝-3 Bag B Material No. Description Material No. Description 名稱 名稱 BK2511 WASHER,d2xD4.5xW0.8 BK2525 FLAP COLLAR,d7xD10xW1.5 墊圈,d2xD4.5xW0.8 避震軸環,d7xD10xW1.5 BK0649-2 LINKAGE BALL(B) BK0435 WASHER,d4xD11xW1.7 內六角連接頭自攻螺絲(B) 墊圈,d4xD11xW1.7 BK0596-1 MAIN ROTOR PITCH HOUSING HMC4-8B SOCKET SCREW M4×8 主旋翼轉座...
  • Page 10 All manuals and user guides at all-guides.com Main Rotor-4 / 主旋翼機構組裝-4 Bag B Material No. Description Material No. Description 名稱 名稱 BK2289 強化主軸 BK2196 控制臂座 HARDENED MAIN SHAFT METAL WASHOUT BASE BK0616 內六角螺絲(半牙),M3x20 HMV740ZZY 滾珠軸承,d4xD7xW2.5 SOCKET SCREW,M3x20 BEARING,d4xD7xW2.5 HMM3Z 止鬆螺帽,M3 HSA3-10 半圓頭內六角螺絲,M3x10 NYLON NUT,M3...

  • Page 11: Main Rotor Head Linkage Rod Installation / 主旋翼頭連桿組裝

    All manuals and user guides at all-guides.com Main Rotor Head Linkage Rod Installation / 主旋翼頭連桿組裝 Bag B Material No. Description Material No. Description 名稱 名稱 BK2236 UPPER BRG 上軸承座 BK2179 DOUBLE JOINT BALL LINK 雙頭連接桿 BK2219 FRAME SPACER 六角連接支柱 BK2228 FLYBAR JOINT BALL LINK 穩定翼連接桿...

  • Page 12: Tail Boom Bracket Assembly / 尾管固定座組裝

    All manuals and user guides at all-guides.com Tail Boom Bracket Assembly / 尾管固定座組裝 Bag C Material No. Description Material No. Description 名稱 名稱 尾管固定座(左) 止鬆螺帽,M3 BK2217-L TAIL BOOM BRACKET-L HMM3Z NYLON NUT,M3 尾管固定座(右) 固定銷,D3x18 BK2217-R TAIL BOOM BRACKET-R BK0081 PIN,D3x18 六角連接支柱...

  • Page 13: Main Frame Assembly / 本體組裝

    All manuals and user guides at all-guides.com Main Frame Assembly-1 / 本體組裝-1 Bag D+E Material No. Description Material No. Description 名稱 名稱 SIDE FRAME RUBBER GROMMETS BK2215 機身側板 BK0274 橡膠墊圈 HMC2-4B SOCKET SCREW,M2x4 BV2238 ELEVATOR WASHER MOUNT SET-L 內六角螺絲,M2x4 升降舵墊片座組(左) BK2246 TANK RUBBER GROMMETS BV2237...
  • Page 14 All manuals and user guides at all-guides.com Main Frame Assembly-2 / 本體組裝-2 Bag D+E Material No. Description Material No. Description 名稱 名稱 BK0594 STARTER COUPLING BK0592 STARTER SHAFT 啟動接頭 啟動軸 BK2241-L CLUTCH BEARING BLOCK-L BK0584 THRUST WASHER 啟動棒軸承固定座(左) 止推墊片 BK2241-R CLUTCH BEARING BLOCK-R HMS5 E -CLIP,5mm...
  • Page 15 All manuals and user guides at all-guides.com Main Frame Assembly-3 / 本體組裝-3 Bag D+E Material No. Description Material No. Description 名稱 名稱 BK0087 WASHER,d3xD8xW1.4 BK2229 MOUNTING BLOCK 墊片,d3xD8xW1.4 側板補強肋 HMC3-10B SOCKET SCREW,M3x10 BK2259 SERVO FRAME B 內六角螺絲,M3x10 伺服機座B HNX3-12B S.B.H SELF TAPPING SCREW BK2232 SERVO FRAME A 半圓頭內六角自攻螺絲...

  • Page 16: Engine Assembly / 引擎動力組裝

    All manuals and user guides at all-guides.com Engine Assembly / 引擎動力組裝 Bag F Material No. Description Material No. Description 名稱 名稱 BV0589 CLUTCH SHOE BK2231 ENGINE MOUNT 離合器組 引擎固定座 BK0170 SHIM HMF2-10N PHILLIPS MACHINE SCREW,M2x10 離合器墊片 圓頭十字螺絲(細),M2x10 BV0143 COOLING FAN BK0075 LINK BALL 冷卻風扇組...
  • Page 17 All manuals and user guides at all-guides.com Main Frame Assembly-4 / 本體組裝-4 Bag G Material No. Description Material No. Description 名稱 名稱 HMC3-10B SOCKET SCREW,M3x10 HMM3Z NYLON NUT,M3 內六角螺絲,M3x10 止鬆螺帽,M3 BK0087 WASHER,d3xD8xW1.4 BK2234 CARBOM BOTTOM FRAME 墊片,d3xD8xW1.4 碳纖維底盤 BK2240-L PLATE MOUNTING BLOCK-L HMC3-6B SOCKET SCREW,M3x6 底盤固定座(左)

  • Page 18: Landing Skid Assembly / 腳架組組裝

    All manuals and user guides at all-guides.com Landing Skid Assembly / 腳架組組裝 Bag G Material No. Description Material No. Description 名稱 名稱 BK0023 ELEVATOR CONTROL ARM LINK BK2515 COLLAR,d3xD5xW4.2 升降舵連接座 控制臂軸環,d3xD5xW4.2 BK0084 PIN,D2x22.8 HMC3-10B SOCKET SCREW,M3x10 固定銷,D2x22.8 內六角螺絲,M3x10 BK2514 METAL ELEVATOR CONTROL ARM BK2261 LANDING SKID 金屬升降舵控制臂...
  • Page 19 The Main Gear & Autorotation Tail Drive Pulley from Raptor 50 series 軸環,d10xD14xW9 (Item No. 4852, 4853, 4854) are also applied to Titan X50. Please insert the Socket Screw to the lower hole of the Main Shaft to fix the Main Gear Set as HMM3Z drawing.
  • Page 20 All manuals and user guides at all-guides.com Main Frame Assembly-6 / 本體組裝-6 Bag H Material No. Description Material No. Description 名稱 名稱 BK2230 FUEL TANK BK2224 RECEIVER FRAME 油箱 接收機座 BE1867 CLUNK BK0473-1 CANOPY SPACER 油箱重錘 機殼支撐柱 BB0363-60 FUEL TUBE,D3.5mm x 60mm BK0474 GROMMET 耐熱油管,D3.5mm x 60mm...
  • Page 21 All manuals and user guides at all-guides.com Main Frame Assembly-7 / 本體組裝-7 Bag H+K Material No. Description Material No. Description 名稱 名稱 HMM3Z NYLON NUT,M3 止鬆螺帽,M3 BK2227 ARM COLLAR 擺臂固定軸環 BK0077 COLLAR,d3xD4xW6 軸環,d3xD4xW6 HME3-30B SET SCREW,M3x30 無頭內六角螺絲,M3x30 HMV740ZZY BEARING,d4xD7xW2.5 滾珠軸承,d4xD7xW2.5 BK0859-1 TAIL BOOM,663mm 尾管,663mm...

  • Page 22: Tail Unit Assembly / 尾旋翼組組裝

    All manuals and user guides at all-guides.com Tail Unit Assembly-1 / 尾旋翼組組裝-1 Bag I Material No. Description Material No. Description 名稱 名稱 BK0028 TAIL PITCH CONTROL SLIDER BUSHING 尾旋翼控制軸套 HMC25-6B SOCKET SCREW,M2.5×6 內六角螺絲,M2.5×6 HMV1060ZZY BEARING,d6xD10xW3 滾珠軸承,d6xD10xW3 HMO26 WASHER,d2.8xD5xW0.5 墊片,d2.8xD5xW0.5 BK0027 TAIL PITCH CONTROL SLIDER 尾旋翼控制滑座...
  • Page 23 All manuals and user guides at all-guides.com Tail Unit Assembly-2 / 尾旋翼組組裝-2 Bag J+K Material No. Description Material No. Description 名稱 名稱 BK2190 CARBON VERTICAL FIN BK0797 BRACKET-UPPER 碳纖維垂直尾翼 固定座(上) HMM3Z NYLON NUT,M3 BK0798 BRACKET-LOWER 止鬆螺帽,M3 固定座(下) BK0046 TAIL UNIT HOUSING-L BK0524-T TAIL SUPPORT ROD 尾座(左)

  • Page 24: Tail Boom Adjustment / 尾管調整

    All manuals and user guides at all-guides.com Tail Boom Adjustment / 尾管調整 Ensure both the main & tail rotor heads rotate effortlessly in correct direction: turn the Main Gear clockwise, the Main Rotor Grips turn clockwise, and the Tail blades turn counter clockwise. 請確認主旋翼及尾旋翼皆旋轉方向正確且順暢：當順時針撥動...

  • Page 25: Servo Installation / 伺服機裝配

    All manuals and user guides at all-guides.com Servo Installation / 伺服機裝配 Bag L Material No. Description 名稱 BUTTON PHILLIPS TAPPING SCREW, M2.6X14 , M2.6X14 HSE2614N 扁圓自攻螺絲( 粗 ) SERVO MOUNTING BK0104 伺服機固定片 Attach the Servos onto the Servo Trays of Main Frame Set as drawing.

  • Page 26: Servos Linkage Rod Installation / 伺服機連桿組裝

    All manuals and user guides at all-guides.com Servos Linkage Rod Installation / 伺服機連桿組裝 Bag K+L Material No. Description Material No. Description 名稱 名稱 HME4-3B SET SCREW,M4x3 無頭內六角螺絲,M4x3 BK0175 LINKAGE ROD,575mm 推拉桿,575mm BK0105-1 TAIL CONTROL ROD JOINT 尾控制桿軸環 BK0092 LINKAGE ROD,30mm 連接桿,30mm BK2195 TAIL SERVO LINKAGE ROD,345mm...

  • Page 27: Receiver & Gyro Configuration / 接收機與陀螺儀配置

    All manuals and user guides at all-guides.com Receiver & Gyro Configuration / 接收機與陀螺儀配置 Bag L+M Material No. Description Material No. Description 名稱 名稱 BK2177 FRP CANOPY BK2278 CANOPY BRACKET 玻纖機殼 機殼固定座 BK0102 RUBBER GROMMET HNX3-12B S.B.H SELF TAPPING SCREW 機身固定墊圈 半圓頭內六角自攻螺絲...

  • Page 28: Main Rotor Blade Assembly / 主旋翼組裝

    All manuals and user guides at all-guides.com Main Rotor Blade Assembly / 主旋翼組裝 Bag KP1 Material No. Description 名稱 HMC4-27B SOCKET SCREW,M4x27 內六角螺絲,M4x27 HMM4Z NYLON NUT,M4 止鬆螺帽,M4 HMC4-27B 內六角螺絲,M4x27 SOCKET SCREW,M4x27 HMM4Z 止鬆螺帽,M4 NYLON NUT,M4 1. You may need to adjust the linkage to ensure the blade tracking. Please refer Page 38, 〝Blade Tracking Adjustment.〞...

  • Page 29: Set-Up Section / 設定程序說明

    All manuals and user guides at all-guides.com SET-UP SECTION / 設定程序說明 Engine Throttle Control Linkage / 引擎的飛行前調整 Mount the steel linkage ball to the outer hole on the plastic throttle arm. At full throttle stick, the carburetor hole should open completely. At low throttle and with the throttle trim all the way down, the carburetor hole should close completely.

  • Page 30: Configuring The Titan X50 / Titan X50 設定

    測量至另一頭 連桿頭中心 The above pushrod lengths permit 3D flying with the Titan X50. Use these lengths as a starting point. Pushrod lengths are measured from ball link center to ball link center. Suggested throttle and collective pitch set up: Idle-up1 is for continuous 3D flying and aerobatics. Idle-up2 is for those who have very good collective pitch management skills.

  • Page 31: Radio And Control Linkage Setup For Titan X50 遙控器設定 & Collective Pitch Setup 螺距設定

    All manuals and user guides at all-guides.com Radio and Control Linkage Setup For Titan X50 遙控器設定 The performance of any RC helicopter and how well it fly depends strongly on how the model has been set up. Before you start, please make up the length of all the pushrods according to the recommended length. The pushrod lengths we have provided are valid for beginners to expert 3D flying.

  • Page 32: Setting Up Data For Your Reference 參數設定參考

    All manuals and user guides at all-guides.com Setting Up Data For Your Reference 參數設定參考 The following is the setting up data of pitch curve and throttle curve for your reference only. Please ask experienced pilot to help you if you have never done this before. 下列參數設定僅供參考，請依實際狀況進行調整，或詢求有經驗的玩家協助。...

  • Page 33: Tail Control And Gyro Setup 尾舵控制及陀螺儀控制

    All manuals and user guides at all-guides.com Tail Control And Gyro Setup 尾舵控制及陀螺儀控制 It is recommended to use a Heading Hold Gyro. With a Heading Hold Gyro, you may not use the trim and the revolution mixing function of tail control. First, choose the length of the tail servo arm referring to the manual of the Gyro.

  • Page 34: Swashplate Type Setting / 十字盤模式設定

    All manuals and user guides at all-guides.com Swashplate Type Setting / 十字盤模式設定 Set the model type for helicopter in your Transmitter and set the swashplate Nose / 機首方向 type as 120°CCPM. Refer your Transmitter manual to find a proper 120° swashplate setting.

  • Page 35: Blade Tracking Adjustment 主旋翼軌跡調整

    All manuals and user guides at all-guides.com Blade Tracking Adjustment 主旋翼軌跡調整 CAUTION / 警告 For safety, ensure to keep a safe distance from the helicopter at least 10 meter (30 feet) while making tracking adjustment. 安全起見，進行主旋翼軌跡調整時，請至少與直昇機保持10米（30呎）的安全距離。 color tape / 色標貼 Out of Track / 雙槳...

  • Page 36: After Flight Checklist 飛行後的檢查項目 & Trouble Shooting 異常處置

    All manuals and user guides at all-guides.com After Flight Checklist 飛行後的檢查項目 (1) Check every screw and bolt to make sure none has loosened due to vibration. (2) Check every rotating and movable part to ensure they still move smoothly and normally. (3) Clean off the exhaust residue from the muffler, engine, and helicopter.

  • Page 37: Spare Parts List / 維修零件包表格

    All manuals and user guides at all-guides.com PARTS LIST SECTION / 零件包目錄 SPARE PARTS / 零件表 NO.3878 AV0052 AV0143 PV0016 PV0017 TT V2 Carbm Blade 600mm TAIL IDEL PULLEY ASSY. COOLING FAN TAIL PITCH CONTROL LEVER TAIL PITCH SLIDER SET 碳纖主旋翼600mm 尾惰輪組...
  • Page 38 All manuals and user guides at all-guides.com SPARE PARTS / 零件表 PV0365 PV0407 PV0450 PV0454 PV0482-L THRUST BRG. d6xD12xW4.5 TAIL PITCH SLIDER SUS FLYBAR ROD SKID PIPE END CAP ULTRA LIGHT PADDLE(BLUE) 止推軸承組 d6xD12xW4.5 尾旋翼滑座 SUS平衡桿零件包 圓管塞 超輕量穩定翼(藍色) PV0504 PV0512-W PV0520-1 PV0521-2 PV0532-1...
  • Page 39 All manuals and user guides at all-guides.com SPARE PARTS / 零件表 PV1314 PV1314-1 PV1314-2 PV1316 PV1315 ELEVATOR ARM SET METAL ELEVATOR WASHER MOUNT SET(L) METAL ELEVATOR WASHER MOUNT SET(R) MAIN SHAFT LOCK RING ONE WAY CLUTCH HOUSING 升降舵控制組 金屬升降舵墊片座組(左) 金屬升降舵墊片座組(右) 主軸止檔圈...
  • Page 40 All manuals and user guides at all-guides.com SPARE PARTS / 零件表 PV1341 PV1341-1 PV1342 PV1343 PV1344 AUTOROTATION TAIL PULLEY, X50 MAIN GEAR COLLAR-X50 ONE WAY CLUTCH SHAFT CANOPY SPACER CLUTCH BEARING BLOCK 自旋尾驅動輪41T, X50 主齒輪組軸環-X50 單向離合器軸組 機殼防震支柱 啟動棒軸承固定座 PV1345 PV1346 PV1347 PV1348 PV1349...
  • Page 41 All manuals and user guides at all-guides.com SPARE PARTS LIST / 維修零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page 1179 SILCONE FUEL LINE, 2ft 耐熱油管(透明), 2ft CB0362 FUEL TUBE, d2.5xt1.5xø5.5mm 耐熱油管（透明）, d2.5xt1.5xø5.5mm 3878 TT V2 Carbm Blade 600mm 碳纖主旋翼600mm BV6033 TT V2 CARBON BLADE 600mm...
  • Page 42 All manuals and user guides at all-guides.com SPARE PARTS LIST / 維修零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page HMJ2-6B SELFTAPPING CCREW, M2x6 圓頭十字自攻螺絲, M2x6 HMJ3-22B SELFTAPPING SCREW, M3x22 自攻螺絲, M3x22 HSE2-10B SELFTAPPING SCREW, M2x10 扁圓型自攻螺絲, M2x10 HSE2612N SELFTAPPING SCREW, M2.6x12 扁圓型自攻螺絲, M2.6x12 HSE3-12B...
  • Page 43 All manuals and user guides at all-guides.com SPARE PARTS LIST / 維修零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page PV0450 SUS FLYBAR ROD SUS平衡桿零件包 SUS FLYBAR BK0631 SUS 平衡桿 PV0454 SKID PIPE END CAP 圓管塞 BK0065 SKID PIPE END CAP 圓管...
  • Page 44 All manuals and user guides at all-guides.com SPARE PARTS LIST / 維修零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page HSA3-10 BUTTON HEAD SOCKET SCREW, M3x10 半圓頭內六角螺絲, M3x10 BK0649-2 LINKAGE BALL(B) 內六角連接頭自攻螺絲(B) BK0016-1 WASHOUT LINKAGE 連接座 BK0171 插銷 HMS15 E RING E型扣環...
  • Page 45 All manuals and user guides at all-guides.com SPARE PARTS LIST / 維修零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page BK0076 COLLAR, d3xD4xW10 軸環, d3xD4xW10 PV1321 METAL SEESAW HUB,X50 金屬穩定桿固定座,X50 BV2186 METAL SEESAW HUB 金屬穩定桿固定座 BK2187 COLLAR, d3xD4xW3.8 軸環, d3xD4xW3.8 HSA3-10 BUTTON HEAD SOCKET SCREW, M3x10 半圓頭內六角螺絲, M3x10...
  • Page 46 All manuals and user guides at all-guides.com SPARE PARTS LIST / 維修零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page PV1339 OUTER DAMPER(7mm),X50 外避震墊圈(7mm),X50 BK2573 OUTER DAMPER(7mm) 外避震墊圈(7mm) PV1340 MAIN GEAR WASHER,X50 主齒輪墊片,X50 BK2524 MAIN GEAR WASHER 主齒輪墊片 PV1341 AUTOROTATION TAIL PULLEY,X50 自旋尾驅動輪41T,X50 BK2286...
  • Page 47 All manuals and user guides at all-guides.com SPARE PARTS LIST / 維修零件包表格 Description 中文名稱 Part No. Description 中文名稱 Qty Index Page PV1357 SCREW BAG,X50 螺絲零件包,X50 BK0087 WASHER d3xD8xW1.4 墊片, d3xD8xW1.4 HNX3-12B S.B.H SELF TAPPING SCREW 半圓頭內六角自攻螺絲 HMC2-4B SOCKET SCREW, M2x4 內六角螺絲, M2x4 HME4-5B SET SCREW, M4x5...

  • Page 48: Optional Parts / 改裝零件表

    All manuals and user guides at all-guides.com OPTIONAL PARTS / 改裝零件表 PV0036 PV0062-Y PV0103 PV0106 PV0050 BEARING SET, d5xD13xW4(METAL TAIL UNIT BRG) PADDLE(BLACK), 30g RUBBER GROMMETS(YELLOW) Carbon Tail Boom Support COOLING FAN 軸承組, d5xD13xW4(金屬尾座專用) 穩定翼組(黑), 30g 機身固定墊圈組（黃色） 碳纖維尾支撐架組 金屬冷卻風扇 PPV0439-L PV0457 PV0466 PV0439...
  • Page 49 All manuals and user guides at all-guides.com OPTIONAL PARTS / 改裝零件表 PV1412 PV1413 PV1414 PV1415 PV1417 METAL ROTOR GRIP LEVER TAIL ROTOR SHAFT SET TAIL CONTROL ROD JOINT METAL STABILIZER CONTROL CAGE METAL TAIL SUPPORT BRACKET 金屬轉座擺臂 尾旋翼軸組 尾控制桿軸環 金屬穩定翼控制框 金屬尾支撐桿固定座...

  • Page 50: Exploded View / 爆炸突檢索

    All manuals and user guides at all-guides.com Exploded View / 爆炸圖檢索 MAIN ROTOR HEAD PV0053 PV1361 PV1323 PV0365 PV1379 PV1362 PV1362 PV0633-1 PV0053 PV1379 PV0633-1 PV1324 PV1362 PV0365 PV1379 PV0450 PV1322 PV0482-L PV1379 PV0661-1 PV1321 PV1322 PV1334 PV0683-1 PV1311 PV1379 PV1316 PV1325 PV1379...
  • Page 51 All manuals and user guides at all-guides.com Exploded View / 爆炸圖檢索 MAIN FRAME PV0021 PV1353 PV0089 PV0021 PV1357 PV1314-1 PV1352 PV1314-1 PV1350 PV1335 PV1357 PV1314 PV1357 PV1353 PV0665 PV0244 PV1358 PV1357 PV1335 PV1358 PV1344 PV0361 PV1314-2 PV0360 PV1329 PV1317 PV1329 PV1358 PV1344 PV1332...
  • Page 52 All manuals and user guides at all-guides.com Exploded View / 爆炸圖檢索 SKID & ENGINE MOUNT PV1346 PV1345 PV1313 PV1313-1 PV1348 PV1313-1 PV1357 PV1359 PV1357 PV1349 PV1354 PV0035-2 -51-...
  • Page 53 All manuals and user guides at all-guides.com Exploded View / 爆炸圖檢索 PV1337 TAIL UNIT PV0347 PV1337 PV1337 PV0520-1 PV0520 PV0521-2 PV1377 PV0677 PV1377 PV1377 PV1337 PV1337 PV0679-T PV0677 PV1310 PV1318 PV1330 PV1310-1 PV1331 PV1330 CANOPY AV0052 PV0504 PV0058 PV0088 PV0030 PV1416 PV1363 PV0016...
  • Page 54 13. High-quality Fiberglass Canopy Preprinted 13. 原廠塗裝完成高亮彩玻纖機頭罩 14. Equipped with Lightweight Paddles for 3D (20-gram) 14. 標準配備20克3D版輕量化平衡翼 15. New Underslung Rotor Head for Ultimate 3D Performance 15. 完全對應3D飛行旋翼頭設計（平衡翼在下） 16. +/- 15° Collective Pitch 16. 主旋翼攻角達+/-15度 THUNDER TIGER manufactured by http://www.thundertiger.com JK0361V3 C 2011...

Table of Contents