Note:
• Only the same type of holes, (A) or (B),
shall be used for mounting.
x
Pass the cables through the hole for cable running from the wall or ceiling.
c
Fix the camera attachment on the mount bracket using the screws supplied with the bracket.
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
Note:
• For wall mounting:
The camera attachment shall be mounted with "gTOP" facing upward. (Except the case of
connecting the conduit upward (
• For ceiling mounting:
The camera attachment shall be mounted with aligning the front side (model number indication
face) of the camera with the position of the arrow in "hFRONT".
• Ensure that any of the arrows on the mount bracket is aligned with the "gTOP" arrow on the
camera attachment.
22
Mount bracket (accessory)
Camera attachment
☞
page 20))