Table of Contents
Advertisement
Installation Guide
Included Installation Instructions
Network Camera
WV-SW396A/WV-SW395A
Model No.
Rain wash coating
Rain wash coating
WV-SW396/WV-SW395
WV-SW396A
(This illustration represents WV-SW396A.)
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
This document is the Installation Guide for use in other countries except Japan.
Advertisement
Table of Contents
Related Manuals for Panasonic WV-SW396A
Summary of Contents for Panasonic WV-SW396A
-
Page 1: Installation Guide
Rain wash coating WV-SW396/WV-SW395 WV-SW396A (This illustration represents WV-SW396A.) Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. - Page 2 For Europe We declare under our sole responsibility that the product to which Wij verklaren als enige aansprakelijke, dat het product waarop deze this declaration relates is in conformity with the standard or other verklaring betrekking heeft, voldoet aan de volgende norm of ander normative document following the provisions of Directive 2004/108/ normatief dokument, overeenkomstig de bepalingen van Richtlijn 2004/108/EC.
-
Page 3: Table Of Contents
Contents Important safety instructions ............................. 4 Limitation of liability ................................5 Disclaimer of warranty ............................... 5 Preface ....................................5 About notations ................................. 5 Main functions ................................... 6 About the user manuals ..............................7 System requirements for a PC ............................7 Trademarks and registered trademarks.......................... -
Page 4: Important Safety Instructions
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 6) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 5: Limitation Of Liability
THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: (1) ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;... -
Page 6: Main Functions
Main functions H.264/MPEG-4 and JPEG triple encoding H.264/MPEG-4 stream and JPEG (MPEG) outputs can be simultaneously provided. * Either H.264 or MPEG-4 is selectable. Introduction of Super Dynamic (MEGA Super Dynamic) (☞ Operating Instructions (included in the CD-ROM)) MEGA Super Dynamic compensates brightness on a pixel-to-pixel basis so that it produces clearer images even if objects have various illumination intensities. -
Page 7: About The User Manuals
About the user manuals There are 2 sets of operating instructions for the WV-SW396A, WV-SW395A, WV-SW396, WV-SW395 as follows. • Installation Guide*: Explains how to install and connect devices, as well as how to connect and configure the network. • Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera. -
Page 8: Trademarks And Registered Trademarks
Trademarks and registered trademarks • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, and DirectX are either registered trademarks or trade- marks of Microsoft Corporation in the United States and/or other countries. • Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. •... -
Page 9: Precautions
Precautions Refer installation work to the dealer. The screws and bolts must be tightened to the Installation work requires technique and experiences. specified torque. Failure to observe this may cause fire, electric shock, Failure to observe this may cause a drop resulting in injury injury, or damage to the product. - Page 10 Do not damage the power cable. Do not touch the dome cover with your bare hands. Do not damage, fabricate, twist, stretch, bundle, or forci- A dirty dome cover causes deterioration of picture quality. bly bend the power cable. Do not place heavy objects. •...
- Page 11 What to do if "WARMING UP-PLEASE WAIT" AVC Patent Portfolio License appears on the display. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT This message indicates that the temperature inside the PORTFOLIO LICENSE FOR THE PERSONAL USE OF A camera has become extremely low. CONSUMER OR OTHER USES IN WHICH IT DOES NOT In such a case, wait until the heater unit of the camera RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN...
- Page 12 Consumable parts The following are consumables: Replace them in accor- dance with their lives. Their lives vary depending on use environment and conditions. Lifetime is just an indication when using the camera at +35 °C {95 °F}. • Lens unit, panning motor, tilting motor, flat cable for tilting: Approx.
-
Page 13: Precautions For Installation
Precautions for installation Panasonic assumes no responsibility for injuries or • Ensure that the mounting surface, anchor and screws property damage resulting from failures arising out are sufficiently strong. of improper installation or operation inconsistent • Do not mount the product on a plaster board or a with this documentation. - Page 14 When noise disturbance may happen (3) Influence by dust in the air or gas emission from vehi- Conduct the power distribution work to keep a distance of cles 1 m {3.28 feet} or more from the 120 V (for U.S. and Depending on the installation environment, dome Canada) or 220 V - 240 V (for Europe and other countries) cover may be dirty due to dust in the air or gas emis-...
-
Page 15: Major Operating Controls
Major operating controls <Main body> Power cable Brown To the power supply (24 V AC, 50 Hz/60 Hz) Blue Green/Yellow – GND External I/O cable Microphone input cable (connector: white) Audio output cable (connector: black) Network cable Output cable for the monitor used for adjustment Safety wire Attachment pipe Housing base (inside) -
Page 16: Insert/Remove An Sdhc/Sd Memory Card
Insert/remove an SDHC/SD memory card How to insert an SDHC/SD memory card Important: • When inserting an SDHC/SD memory card, make sure the direction. Step 1 Step 3 Pull out the main sunshield rear cover on the rear of the Turn the water-resistant cap to the "OPEN"... - Page 17 Step 5 Step 7 Align "" of the water-resistant cap to "OPEN " of the First, insert the tab on the bottom of the main sunshield camera. Then, turn the water-resistant cap toward " rear cover into the main body, and then push the tab on LOCK"...
-
Page 18: Installations/Connections
Installations/Connections Caution: • ONLY CONNECT 24 V AC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/ UL/CSA 60950-1). Before installation, prepare the following When mounting this camera, wall mount bracket WV-Q122A (option) is required. When mounting the camera on a bracket that is locally procured, the attachment pipe is required. - Page 19 How to detach the housing base Step 1 Remove the fixing screws (3 pcs.*) that are securing the housing base and the camera. The removed screws will be required when attaching the housing base to the camera again. Use caution not to lose these screws.
- Page 20 Installation Before starting installation/connection, make sure that the power cable is not connected to the main power supply. Refer to the "Precautions for installation" section before starting installation/connection. (☞ Page 13) Mounting the Bracket Step 1 q Fix the bracket to the installation surface using appro- Install the mounting bracket.
- Page 21 <Installation example> Step 4 Mount the camera on the bracket. q Attach the housing base to the mount bracket using Safety wire the hexagon screws (M5) attached to the housing base* provided with the mount bracket. (Recommended tightening torque: 2.45 N·m {1.81 lbf·ft}) The "REAR"...
- Page 22 Important: Step 5 • Joint both sides of the front and rear sunshields Attach the front and rear sunshields (accessory) to the before fitting in the main sunshield. camera. • Do not trap the safety wire inside. q Put the fingers on the dents of the front and rear sun- •...
- Page 23 Step 8 SW396A SW395A After the installation is completed, remove the tape wrapped around the camera while holding the Protection Cover, and then take off the Protection Cover. Camera tape Dome cover Protection Cover...
- Page 24 Connection Caution: • Before starting connections, make sure that the power connection (24 V AC power cord or LAN cable) is discon- nected. Failure to observe this may cause fire, electric shock, injury, or damage to the product. • A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE EQUIPMENT POWERED BY 24 V AC POWER SUPPLY.
- Page 25 • 24 V AC power supply connector kit (accessory) • Network cable Recommended specification of cable (wire) Connect a LAN cable (category 5e or better, STP*) to the network connector. * For Europe Wire size (AWG), (0.22 mm) (0.33 mm) (0.52 mm) (0.83 mm) stranded...
- Page 26 • External I/O cable Note: Important: • Make sure that the stereo mini plug is connected to • Input and output of the external I/O terminal 2 and 3 this cable. When a monaural mini plug is connected, can be switched by configuring the setting. The audio may not be heard.
-
Page 27: Connection Example
Connection example (Refer to page 24 for how to connect the cables.) When connecting with a PC directly <Required cable> LAN cable (category 5e or better, cross, STP*) * For Europe RJ-45 female connector (cable integrated type) Powered speaker (option) LAN cable (category 5e or better, cross, STP*) To the power supply... - Page 28 When connecting to a network using a PoE+ hub * When connecting to a network using a PoE+ hub when the temperature is –30 °C {–22 °F} or less, use a 24 V AC power supply. <Required cable> LAN cable (category 5e or better, straight, STP*) * For Europe Hub, router PoE+ (IEEE802.3at compliant) is applied when the power is supplied.
-
Page 29: Initialize The Camera
Initialize the camera Use the initial set switch to reset the settings of the camera to the default. Important: • The settings including the network settings will be initialized. Note that the preset position settings and the CRT key (SSL encryption key) used for the HTTPS protocol will not be initialized. Step 1 Step 5 Open the SDHC/SD memory card slot cover by following... -
Page 30: Configure The Network Settings
Select the camera you want to configure, and click [Access Camera]. Note: • When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same MAC address as the MAC address printed on the camera that you want to configure. - Page 31 • When changing settings related to the network settings, such as connection mode, IP address, and subnet mask, click the [Network Settings] button in [Panasonic IP Setting] screen as shown in step c, then change each setting. • Due to security enhancements in “IP Setting Software”, “Network settings” of the camera to be configured cannot be changed when around 20 minutes have passed after turning on the power of the camera.
-
Page 32: Troubleshooting
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Reference Symptom Cause/solution pages When using a PoE+ device for power supply... - Page 33 • The camera may be out of order. Contact your dealer. • Refer to our website Live indicator keeps on (http://security.panasonic.com/pss/security/support/info.html) for − blinking red. further information after checking the displayed contents of the "Maintenance" page - the [Status] tab - "Self check" of the setup menu.
- Page 34 Reference Symptom Cause/solution pages The power cable insulation is The power cable and connectors are worn out. damaged. This may result in electric shock or a fire. Unplug the power cable from the AC outlet immediately, and refer The power cable, plug and to qualified service personnel.
-
Page 35: Specifications
Specifications • Basic Power source: 24 V AC or PoE+ (IEEE802.3at compliant) Power consumption: SW396A SW396 24 V AC*: 50 Hz/60 Hz: 43 W/1.8 A, PoE+: Approx. 25 W/460 mA (Class 4 device) SW395 24 V AC*: 50 Hz/60 Hz: 43 W/1.8 A, PoE+: Approx. 24 W/440 mA SW395A (Class 4 device) * ONLY CONNECT 24 V AC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or... - Page 36 • Camera SW396 Image sensor: SW396A 1/4type MOS image sensor SW395A SW395 1/3type MOS image sensor Effective pixels: Approx. 1.3 megapixels Scanning area: SW396 3.60 mm (H) ×2.70 mm (V) {5/32 inches (H) × 3/32 inches (V)} SW396A SW395 4.80 mm (H) ×3.60 mm (V) {3/16 inches (H) × 5/32 inches (V)} SW395A Scanning system: Progressive...
- Page 37 • Lens Zoom ratio: 36x/72x with Extra Optical Zoom (at VGA) SW396A SW396 SW395 18x/36x with Extra Optical Zoom (at VGA) SW395A Digital (electronic) zoom: SW396 12x (Max 864x combined with Extra Optical Zoom at VGA) SW396A SW395 12x (Max 432x combined with Extra Optical Zoom at VGA) SW395A Focal length: SW396A...
- Page 38 (Including the camera itself) Compatible SDHC/ SD memory card (option): Manufactured by Panasonic (SD speed class 4 or higher) SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 2 GB (except miniSD card and microSD card)
-
Page 39: Standard Accessories
Standard accessories Installation Guide (this document) ........................1 set Warranty card ..............................1 set CD-ROM* ................................1 pc. Code label* ................................1 pc. The following parts are used during installation procedures. Front and rear sunshields ........................... 1 pc. each Front/rear sunshield fixing screw ....................2 pcs. (incl. 1 spare) 8P alarm cable ..............................1 pc. - Page 40 For Europe and other countries: Panasonic Corporation Panasonic System Communications Company of North America, http://panasonic.net Unit of Panasonic Corporation of North America www.panasonic.com/business/ Panasonic System Networks Co., Ltd. For customer support, call 1.800.528.6747 Fukuoka, Japan Two Riverfront Plaza, Newark, NJ 07102-5490 Authorised Representative in EU: Panasonic Canada Inc.