Panasonic WV-SW352 Installation Manual page 38

x
Adjust the angular field of view and the focus.
Adjust the angular field of view in accordance with the distance between the camera lens and a
photographic subject. These adjustments shall be performed together with the camera angle
adjustment.
FOCUS ADJUSTMENT
LOW
....... | ............
INDICATOR
PEAK HOLD
q Loosen the zoom lock knob and move the knob between TELE and WIDE to obtain the appro-
priate angle of view.
Note:
• The focus may not be adjusted appropriately when the zoom ring is positioned at the "W" (or
"T") end. In this case, adjust the focus again by slightly moving the zoom ring to the direction of
"T" (or "W").
w To adjust the angular field of view with a higher zooming effect even after rotating the zoom ring
almost fully in the "T" direction, hold down the auto focus (AF) button/extra optical zoom button
for 5 seconds or more. 2x extra optical zoom will be applied. When the image capture size
under "VGA" is applied, the zoom factor can be adjusted up to 2x without deterioration of
image quality. When holding down the auto focus (AF) button/extra optical zoom button again
for 5 seconds or more, 1x extra optical zoom will be applied.
e Tighten the zoom lock knob.
r When the auto focus (AF) button is pressed, the auto focus (AF) indicator will light for around
10 seconds, and the focus is automatically adjusted.
38
HIGH
775 BEST
780 FOCUS
Zoom lock knob
Loosen
Auto focus (AF) button/
Extra optical zoom button
Tighten
Zoom ring
Focus ring
* Do not move the focus ring.