Major Operating Controls; Camera Attachment - Panasonic WV-SF438 Installation Manual

Major operating controls

Lens
* Do not touch the lens with your bare hands.
Sub cover
Camera attachment (accessory)
About the [INITIAL SET] button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for about 5 seconds or more without releasing this button. Wait about 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Do not turn off the power of the camera during the process of initialization. Before
initializing the settings, it is recommended to write down the settings in advance.
About the indicators inside the SD memory card slot cover
The Access indicator, Link indicator, and SD memory card error indicator inside the SD memory
card slot cover can be turned off. (Indicators are set to light or blink in the default settings.)
Turn off the indicators as required according to the installation environment. (☞ Operating
Instructions (included in the CD-ROM))
SD memory card slot
INITIAL SET button
SD memory card slot cover
Direction marker for installation
Link indicator
(lit when linking)
Access indicator
(blinks when accessing)
<Inside view of the SD memory
card slot cover (with SD memory
card slot cover removed)>
SD memory card
error indicator
15